Victron Lynx Power In (M8) — LYN020102000

The Victron Lynx Power In (M8) is a DC busbar input module designed for use within the Lynx modular distribution system. It provides a clean, high-current DC connection point for battery banks and power sources, and is intended for professional off-grid, marine, and vehicle installations where organised, reliable DC distribution is required.

Key Features

• M8 bolt connections for battery and power input cables, suitable for high-current DC applications.
• Designed to integrate directly with other Lynx system modules including the Lynx Distributor, Lynx Shunt VE.Can, and Lynx Ion BMS.
• Modular form factor allows the Lynx system to be expanded or reconfigured without rewiring the full busbar assembly.
• Compact, enclosed housing keeps DC busbars protected and connections organised in a single assembly.
• Compatible with the full range of Victron Lynx system components, enabling a scalable DC distribution architecture.
• Weight of 2.105 kg reflects a solid, substantial construction suited to permanent installation.

Product Overview

The Lynx Power In module serves as the input section of the Lynx modular busbar system. It accepts the main DC feed from a battery bank or other DC source via M8 bolted terminals, and passes that power through to connected Lynx modules downstream. This bolted connection approach is standard practice in high-current DC systems, providing a low-resistance, mechanically secure joint that is less prone to loosening than compression-only terminals.

The Lynx system as a whole is designed to replace the traditional arrangement of individual busbars, fuses, and shunts wired separately. By combining these functions into a modular rail, it reduces the number of individual connections in a DC system, which in turn reduces potential fault points. The Power In module is the starting point of that architecture, and its M8 terminal sizing is appropriate for the cable gauges typically used in battery systems from a few kilowatt-hours upward.

Note: This listing is for SKU LYN020102000. If stock shows zero, the equivalent product is available under SKU LYN020102010. Check availability before ordering.

Specifications

• SKU: LYN020102000
• GTIN: 8719076022589
• Connection type: M8 bolted terminals
• Weight: 2.105 kg
• Product family: Victron Lynx modular DC distribution system

Applications

• DC input distribution in off-grid solar power systems with large battery banks.
• Marine electrical installations requiring organised, high-current DC busbars.
• Vehicle and motorhome conversions with multi-battery or lithium battery setups.
• Industrial and commercial off-grid systems using Victron Quattro or MultiPlus inverter-chargers.
• Any installation where the full Lynx modular busbar system is being deployed.

What Is Included

• 1 x Victron Lynx Power In (M8) module — LYN020102000

Installation Notes

The Lynx Power In module carries the full DC supply current of the system and must be installed by a qualified electrician or experienced system integrator familiar with high-current DC installations. Ensure cable sizing, fusing, and terminal torque values comply with the relevant wiring regulations (BS 7671 in the UK). The module should be mounted securely in a dry, ventilated location. For lithium battery systems, verify compatibility with the BMS and protection devices in use before commissioning.